Fast & cheap shipping
Warranty registration
30 days money back guarantee
Returning to W6

Overlock feet

Want your fabric projects to look like you bought them? You can get such professional seams with an overlock machine. It does sewing and overlocking in one step. This will save you a lot of time that you can use for other ideas.

Of course, you also need suitable accessories for an overlock machine, such as special needles and overlock feet. In the W6 online shop you will find different versions to realise even the most demanding sewing projects. Discover the wonderful possibilities that an overlock machine can offer you!

W6 sewing machine overlock band and elastic band guide W6 N 454D
Presser foot for the W6 WERTARBEIT overlock W6 N 454DApplication: This can be used to sew on decorative bands more easily or to hem bands with the seam in one work step. Great effects with firm fabrics or elastic fabrics. Use the W6 Wertarbeit super stretch 90 needles.Machine setting:Use e.g. the 4-thread seamSet the stitch length to 2.5 to 4Before starting the sewing process, correctly align your elastic or decorative band by loosening the screw of the band guide and inserting your band there.Slide the band up to the end of the presser foot to ensure that the overlock can catch the band when starting the sewing process.With textile bands, the adjusting screw is to be loosened until the band can be pulled through without any resistance.With elastic bands, the adjusting screw is to be tightened until the desired degree of stretching is achieved. This means that it should be possible to pull through the elastic band with medium force while the presser foot is lifted. Please make a trial stitch on the band to see whether it is sewn correctly. With elastic bands, it may be necessary to increase the tension of the needle threads.Always guide the band at the right-hand stop end of the band guide when sewing.Start and end of the seam with rounded-off pieces:Start sewing as described above. Cut off the start of the band that is not sewn on and sew until shortly before the end of the seam. Tip: Cut off the band such that the ends touch each other or overlap slightly.Reinforce the seam by sewing over the already finished seam for about 5 cm.Attachment1. Slightly loosen the screw, do not completely remove it.2. Mount the band guide and tighten the screw3. Mounted band guide4. Insert the elastic band into the band guide and sew it on as described.

€23.95*
W6 sewing machine overlock blind hem foot W6 N 454D
Presser foot for W6 WERTARBEIT overlock W6 N 454DApplication: Blind hems require good practice to achieve good results. You can sew these hems with the overlock machine. The foot has an adjustable stop end for perfect edge guidance to ensure ideal hems. Suitable for less elastic and firmer types of fabric.Machine setting:Overlock setting. 4-thread and 3-thread overlock stitch. (standard)Fold the hem at the desired width.Iron this width.Fold the fabric back to the right side of the fabric.Approximately 5-6 mm of the edge should be left here.Place the hem towards the presser foot such that the fold rests against the guide.Adjust the guide such that the needles catch the fold in a straight line.

€15.95*
W6 sewing machine overlock gathering foot W6 N 454D
Presser foot for W6 WERTARBEIT overlock W6 N 454DApplication: The original W6 gathering foot can be used for overlocking and gathering 2 fabric layers at the same time. Light fabric types should be used, if possible.Machine setting:Setting: 4 thread OV seamIncrease the differential: 1.5 - 2.25Increase the stitch length: 3-4Knife switched onAttachmentSetting and insertion of fabric Finished gathering seam

€12.90*
W6 sewing machine overlock hem guide W6 N 454D
Presser foot for the W6 WERTARBEIT overlock W6 N 454DApplication: Allows you to easily set your desired distance for sewing your overlock stitch. Seaming is simplified. The fabric cannot slip while seaming. To be used with firm fabrics or elastic fabrics. Please use the W6 Wertarbeit super stretch 90 needles.Attachment:1. Slightly loosen the screw, do not completely remove it.2. Mount the hem guide3. Hem guide width adjustment: For this purpose, pull out or slide in the hem guide.TIP: If it is difficult to adjust the hem guide, please loosen the black screw at the top of the hem guide a little.4. You can guide your fabric accurately and in a straight line through the hem guide.

€12.90*
W6 WERTARBEIT bead and sequin foot for W6 N 656D, free-arm
This special overlock is used for sewing on beads, sequins, rhinestone laces and pieces of string.Overlock setting:Differential: NNeedles: Use only the right or only the left needle, depending on the material width Thread tension: Set all thread tensions used to 4Stitch length: 3 to 4Procedure:Raise the overlock footBring the needles in the highest position using the handwheelFor small beads, only use the right needle, for large beads only the left needleGuide the bead band through guide 1 (see drawing) and through guide 2 (see drawing) longitudinallyFor all hem widths, always work with the knifeLower the overlock footGuide the fabric along the front right edge of the overlock footApplication video:

€16.95*
W6 WERTARBEIT bias binding foot for W6 N 656D free-arm
This special overlock foot can be used for attaching bands.It is ideally suited for elastic bands with a width of 0.5 cm.Though it takes a bit more skill, you can also sew on elastic bands with a maximum width of 1.3 cm.The hems of knitted fabrics are protected against extreme widening by means of these bands.Overlock setting:Differential: NNeedles: One or 2 needles, depending on the width of the bandThread tension: Set all thread tensions used to 4Stitch length: 2.5Procedure:Raise the overlock footBring the needles into the highest position by means of the handwheelSlide the band into band guide 1 of the overlock footWhen doing this, place the band such that it is in direct contact with the right edge 2 (see drawing) of band guide 1 (see drawing)Now fix the band in the proper position using the adjusting screw 3 (see drawing) so that the band will run securely and in a straight lineLower the overlock footApplication video:

€16.95*
W6 WERTARBEIT blind hem foot, for W6 N 656D only, free-arm
This special overlock foot is used for sewing blind stitches. Cutting, chaining and sewing the hem are all done in one single work stepOverlock setting:Differential: NNeedles: only the right needleThread tension: Set all thread tensions used to 4Stitch length: 3 to 4Procedure:Raise the overlock footBring the needles into the highest position using the handwheelFold the fabric and place it below the blind hem foot, as shown in the drawingAdjust the guide rail 2 (see drawing) via the adjusting screw 1 (see drawing) such that the right needle just pierces the fold of the fabricDuring the sewing process, make sure that the fold is alway touching the guide rail 2 (see drawing)Lower the overlock footPull apart the fabric after the sewing processThen iron the fabric from the left sideApplication video:

€16.95*
W6 WERTARBEIT elastic band foot for W6 N 656D / 707D free-arm
This special overlock foot is used for sewing on elastic bands. The fabric is cut, chained and gathered in one work step. The gathering effect is created by tensioning the elastic band sewn onto the fabric. The more the elastic band is stretched, the stronger the gathering effect. The degree of stretching is regulated with the adjusting screw 2 (see drawing)Overlock setting:Differential: NNeedles: 1 or 2 needles, depending on the desired seam widthThread tension: Set all thread tensions used to 4Stitch length: 2.5 to 4Insertion of the elastic band:Raise the overlock footBring the needles into the highest position with the handwheelLoosen the adjusting screw 2 by turning it counter-clockwiseSlide the elastic band 3 (see drawing) under the elastic band guide 1 (see drawing)The gathering effect is controlled via the adjusting screw 2 (see drawing).Turning the adjusting screw 2 (see drawing) clockwise will increase the gathering effect.Turning the adjusting screw 2 (see drawing) counter-clockwise will decrease the gathering effect.Lower the overlock footApplication video:

€16.95*
W6 WERTARBEIT gathering foot for W6 N 656D free-arm
This special overlock foot is used for connecting two fabric layers, whereby the lower fabric layer is gathered while the upper fabric layer remains smoothOne work step includes cutting and chaining as well as gathering the lower fabric layer.Overlock setting:Differential: 1.5 to 2Needles: right and left needleThread tension: Set all thread tensions used to 4Stitch length: 3 to 4Procedure:Raise the overlock footBring the needles into the highest position with the handwheelPlace the lower fabric layer 1 (see drawing) between the needle plate and the gathering foot, and slide it up to the upper knifePlace the upper fabric layer 2 (see drawing) into the opening of the gathering foot 3 (see drawing) and slide to the stop 4 (see drawing)Lower the overlock footApplication video:

€16.95*
W6 WERTARBEIT piping foot for W6 N 656D, free-arm
This special overlock foot can be used for sewing a cord between two layers of fabric.Overlock setting:Differential: NNeedles: both needles or only the left needleThread tension: Set all thread tensions used to 4Stitch length: 2.5Procedure:Raise the overlock footBring the needles into the highest position using the handwheelPlace the lower fabric piece, the cord and the upper fabric piece (fabrics placed with the right side facing the right side) together under the overlock foot and slide them up to the upper knifeLower the overlock footAttention! The cord must run in the guide 1 (see drawing)Application video:

€16.95*

High-quality overlock feet from W6 Wertarbeit

You don’t just need a sewing machine or overlock for sewing. Little sewing tools such as needles and feet are essential for success. The overlock feet meet the special demands that you also have of your machine. Use a blind hem foot and create invisible seams. The foot cuts, overcasts and sews the hem in one single step. The catch of the foot can be adjusted according to your needs to create the perfect edge guide. It is especially suited for firmer types of fabric and more non-stretch materials.

Use a hem guide to adjust the desired distance while sewing. This won’t just make it easier to guide the hem, it also means that the fabric won’t slip. You can enjoy tidy and straight seams.

If you are working with knitted fabric, we recommend sewing bands into the hem so that the fabric doesn’t stretch too much over time. We have the bias binding foot for this purpose.

Pay attention to which overlock machine you have. We have produced some presser feet for specific W6 models.

Implement creative ideas with special feet

Use other variants to add creative accents and applications: This is how you easily create a fabric work of art. Thanks to the foot for guiding bands and elastic, you have a tool that you can use to sew on decorative bands. Or incorporate the bands and the seam into the same work step. You can enjoy some marvellous effects. If you would like to add cords between two layers of fabric, the piping foot is the perfect choice.

The gathering foot for the overlock can gather, sew and overlock two light layers of fabric. Adorn your garment with cute gatherings. Do you love beads, sequins, rhinestone ribbons and strings? Then you will love the bead and sequin foot. Add personal decorations to your fabric and create a brilliant work of art from fabric.

Sewing, overlocking, embroidery and more – At W6, you will find everything related to the traditional craft

If you’re looking for high-quality sewing equipment, we at W6 Wertarbeit are your reliable and highly competent partners. From curious beginner to ambitious hobby tailor to professional, we have the right sewing machine models and overlock models to suit your individual needs. You can also order all kinds of accessories and consumables such as thread directly as well. We also have the best equipment for course teachers and schools.

Top branded products and first-class service: This is real craftsmanship. And this is also what such a traditional and creative craft deserves. Our tip: If you register on the W6 website, you will receive a 10-year warranty for your new embroidering machine or overlock.

Got any questions? Are you unsure whether the overlock foot you want can be used in your overlock machine? Contact us and we can advise you: by phone or via email.

W6 Wertarbeit
W6 Wertarbeit
Hallo :-)
Willkommen in unserem Shop! Außerhalb unserer Öffnungszeiten können wir Ihre Anfrage leider nicht beantworten.
whatspp icon whatspp icon